Embedded Systems – Cognuitive

Embedded Systems & Firmware Development

When software alone isn’t enough, we build the hardware that runs it.

Cognuitive Solutions helps companies design, build, and ship embedded products and IoT devices from early prototypes to field-tested units in real environments.

If you need a device that senses, decides, and talks to the rest of your system, this is the team that actually makes it real.

Our engineering team covers the full stack:

Core Capabilitie

Firmware & MCU Development

Bare-metal or RTOS, low power or high throughput – we build firmware that is reliable and maintainable.

Embedded C / C++ for 32-bit MCUs
ARM Cortex-M (STM32, NXP, Nordic, etc.), ESP32, Microchip and similar families
FreeRTOS and lightweight scheduling frameworks
Real-time control, state machines, timers, and interrupt-driven logic
OTA update support where required
Robust error handling, logging, and field diagnostics

We design firmware so that your team can read it later, not just the engineer who wrote it.

Electronics & PCB Design

We handle the full electronics side, from concept to production-ready files.

Requirements capture: signals, voltages, loads, environment
Schematic design (sensors, power, interfaces, protection circuits)
PCB layout with proper grounding, decoupling, and EMI/EMC awareness
Power supply and battery management (Li-ion, supercaps, DC supplies)
Signal integrity considerations for high-speed traces where needed

We deliver full design packages: schematics, PCB gerbers, BOM, and assembly notes.

Connectivity & Protocols

We make your devices talk to the outside world – cleanly and securely.

Short-range: BLE, Wi-Fi, Zigbee/thread (where relevant)
Long-range: LTE / NB-IoT modules (partner-dependent), LoRaWAN
Industrial: Modbus (RTU/TCP), CAN, RS-485/RS-232, simple serial bridges
Application-level protocols: MQTT, HTTP/REST, WebSockets
Integration with gateways, local servers, or cloud backends (AWS/Azure/custom)

We align protocol choices with your constraints: latency, bandwidth, power, and cost.

Edge + Cloud Integration

An embedded device is usually one part of a bigger system. We know how to stitch it together.

Device-to-cloud and device-to-local-server flows
Secure onboarding (keys, IDs, provisioning flows)
Simple local dashboards or integration with existing MES / SCADA / ERP
Data models that make sense for analytics and monitoring
Hooks for future AI/ML on top of sensor data
Robust error handling, logging, and field diagnostics

We keep the architecture simple enough to run and structured enough to grow.

Prototyping, Testing & Production Support

We help you get from “idea” to “first 50 units” to “scaling up.”

Rapid prototypes on dev boards + quick PCBs to validate concepts
Test jigs and basic production test routines for your manufacturer
Field-testing support: logging, configuration tools, firmware updates
Documentation: wiring diagrams, test procedures, and “how to bring-up” guides

The aim is not just to make a cool demo – it’s to make something that can be built repeatedly.

How We Work

1. Discovery & Requirements

We start with constraints, not buzzwords:

Result: A clear requirements spec and draft architecture, agreed by both sides.

2. Architecture & Design

We propose a grounded architecture:

MCU family selection, memory and IO sizing
Power architecture and safety considerations
Connectivity choice with pros/cons
High-level firmware modules and update strategy
Cost targets and expected production volume

Once agreed, we proceed with schematics, firmware skeleton, and PCB design.

3. Prototyping & Firmware Bring-Up

We move fast but in controlled steps:

You see the system working early, even if the hardware isn’t in final mechanical packaging yet.

4. Field Validation

We don’t stop at “it works on the bench.”

The goal: Pedictable behavior in the environment where it will live.

5. Preparing for Production

When you’re ready to scale, we support:

So you don’t get stuck when you go from 10 units to 500 or 5,000.

Typical Partners

Who We Work With

Industrial & manufacturing companies: Modernizing existing machines, adding data collection, or building custom control units.
Product companies and startups: Turning a concept for a smart device into a real, manufacturable product.
Software / SaaS teams: That need a solid hardware endpoint instead of fragile, off-the-shelf boards.

Engineering Commitments

Why Cognuitive

Hardware + Software mindset: We sit at the intersection of embedded, IoT, and applications. We understand how your device, backend, and dashboards need to work together.
Industrial reality, not lab fantasies: We’re used to noisy power, imperfect sensors, messy environments, and non-technical end users. Designs reflect that.
Transparent engineering: You get schematics, source code, and documentation – not a black box. We’re comfortable working with your in-house team or being your external embedded team.
Future-proof, not overbuilt: We don’t force you into over-complicated architectures. We choose parts and stacks that can be maintained, not just presented nicely in a slide.

We don’t sell generic “IoT in a box.” We build specific, working systems.

Even if you’re not sure how to describe the hardware yet, if your question is essentially: “We need a device that does X in the real world” then you’re in the right place.

You bring the business goal and constraints. We design the electronics and firmware to match. Turn a concept into a concrete, buildable first version.

Work with us

We would love to hear more about your project

Let’s talk

Full-stack product studio: AI/ML, custom software, embedded/IoT, and Microsoft ERP/CRM. We design, build, and operate production systems with security, observability, and measurable results.